The letter M is derived from the Phoenician Mem, via the Greek Mu (Μ, μ). Semitic Mem is most likely derived from a 'Proto-Sinaitic' (Bronze Age) adoption of the 'water' ideogram in Egyptian writing.The Egyptian sign had the acrophonic value /n/, from the Egyptian word for 'water', nt; the adoption as the Semitic letter for /m/ was presumably also on acrophonic grounds, from the Semitic word. The trial version allows you to play the single-player game until you reach level 8 (or until the day 30) at which time it automatically saves your character and quits. After purchasing and entering a serial key, the limit will be unlocked and you may resume playing with the same character and access the multi-player servers.
M.2, formerly known as the Next Generation Form Factor (NGFF), is a specification for internally mounted computer expansion cards and associated connectors. It replaces the mSATA standard, which uses the PCI Express Mini Card physical card layout and connectors. M.2 can run an SSD over SATA (different than mSATA) or PCIe. The difference between M.2 SATA and M.2 PCIe can be discerned by their key notches. SATA M.2 cards (not to be confused with mSATA, which has two connector keys) have three connector notches while PCIe M.2 cards have only two. M.2's more flexible physical specification allows different module widths and lengths, and, paired with the availability of more advanced interfacing features, makes the M.2 more suitable than mSATA for solid-state storage applications in general and particularly for the use in small devices such as ultrabooks or tablets.[1][2][3]
Computer bus interfaces provided through the M.2 connector are PCI Express 3.0 (up to four lanes), Serial ATA 3.0, and USB 3.0 (a single logical port for each of the latter two). It is up to the manufacturer of the M.2 host or device to select which interfaces are to be supported, depending on the desired level of host support and device type. The connector keying notches of M.2 devices denote various purposes and capabilities of M.2 hosts and modules. The unique key notches of M.2 standard cards and devices also prevent them from being inserted into incompatible host connectors.[1][2][4]
In addition to supporting legacy Advanced Host Controller Interface (AHCI) at the logical interface level, M.2 specification also supports NVM Express (NVMe) as the logical device interface for M.2 PCI Express SSDs. While the support for AHCI ensures software-level backward compatibility with legacy SATA devices and legacy operating systems, NVM Express is designed fully to utilize the capability of high-speed PCI Express storage devices to perform many I/O operations in parallel.[1]:14[5]
- 1Features
Features[edit]
Buses exposed through the M.2 connector are PCI Express 3.0, Serial ATA (SATA) 3.0 and USB 3.0, which is backward compatible with USB 2.0. As a result, M.2 modules can integrate multiple functions, including the following device classes: Wi-Fi, Bluetooth, satellite navigation, near field communication (NFC), digital radio, WiGig, wireless WAN (WWAN), and solid-state drives (SSDs).[6] The SATA revision 3.2 specification, in its gold revision as of August 2013, standardizes the M.2 as a new format for storage devices and specifies its hardware layout.[1]:12[7]
The M.2 specification provides up to four PCI Express lanes and one logical SATA 3.0 (6 Gbit/s) port, and exposes them through the same connector so both PCI Express and SATA storage devices may exist in the form of M.2 modules. Exposed PCI Express lanes provide a pure PCI Express connection between the host and storage device, with no additional layers of bus abstraction.[8]PCI-SIG M.2 specification, in its revision 1.0 as of December 2013, provides detailed M.2 specifications.[1]:12[9]
Storage interfaces[edit]
Three options are available for the logical device interfaces and command sets used for interfacing with M.2 storage devices, which may be used depending on the type of M.2 storage device and available operating system support:[1]:14[5][8]
- Legacy SATA
- Used for SATA SSDs, and interfaced through the AHCI driver and legacy SATA 3.0 (6 Gbit/s) port exposed through the M.2 connector.
- PCI Express using AHCI
- Used for PCI Express SSDs and interfaced through the AHCI driver and provided PCI Express lanes, providing backward compatibility with widespread SATA support in operating systems at the cost of performance. AHCI was developed when the purpose of a host bus adapter (HBA) in a system was to connect the CPU/memory subsystem with a much slower storage subsystem based on rotating magnetic media; as a result, AHCI has some inherent inefficiencies when applied to SSD devices, which behave much more like DRAM than like spinning media.
- PCI Express using NVMe
- Used for PCI Express SSDs and interfaced through the NVMe driver and provided PCI Express lanes, as a high-performance and scalable host controller interface designed and optimized especially for interfacing with PCI Express SSDs. NVMe has been designed from the ground up, capitalizing on the low latency and parallelism of PCI Express SSDs, and complementing the parallelism of contemporary CPUs, platforms and applications. At a high level, primary advantages of NVMe over AHCI relate to NVMe's ability to exploit parallelism in host hardware and software, based on its design advantages that include data transfers with fewer stages, greater depth of command queues, and more efficient interrupt processing.
Form factors and keying[edit]
The M.2 standard has been designed as a revision and improvement to the mSATA standard, with the possibility of larger printed circuit boards (PCBs) as one of its primary incentives. While the mSATA took advantage of the existing PCI Express Mini Card (Mini PCIe) form factor and connector, M.2 has been designed from the ground up to maximize usage of the PCB space while minimizing the module footprint. As the result of the M.2 standard allowing longer modules and double-sided component population, M.2 SSD devices can provide larger storage capacities and can also double the storage capacity within the footprints of mSATA devices.[1]:20,22–23[3][10]
M.2 modules are rectangular, with an edge connector on one side (75 positions with up to 67 pins, 0.5 mm pitch, pins on opposing sides of the PCB are offset from each other), and a semicircular mounting hole at the center of the opposite edge. Each pin on the connector is rated for up to 50 V and 0.5 A, while the connector itself is specified to endure up to 60 mating cycles.[11]:6 The M.2 standard allows module widths of 12, 16, 22 and 30 mm, and lengths of 16, 26, 30, 38, 42, 60, 80 and 110 mm. Initial line-up of the commercially available M.2 expansion cards is 22 mm wide, with varying lengths of 30, 42, 60, 80 and 110 mm.[2][4][11][12] M.2 module codes contain both the width and length of a particular module; for example, 2242 as a module code means that the module is 22 mm wide and 42 mm long, while 2280 denotes a module 22 mm wide and 80 mm long.
An M.2 module is installed into a mating connector provided by the host's circuit board, and a single mounting screw secures the module into place. Components may be mounted on either side of the module, with the actual module type limiting how thick the components can be; the maximum allowable thickness of components is 1.5 mm per side. Different host-side connectors are used for single- and double-sided M.2 modules, providing different amounts of space between the M.2 expansion card and the host's PCB.[3][4][11] Circuit boards on the hosts are usually designed to accept multiple lengths of M.2 modules, which means that the sockets capable of accepting longer M.2 modules usually also accept shorter ones by providing different positions for the mounting screw.[13][14]
| Key ID | Notched pins | Provided interfaces |
|---|---|---|
| A | 8–15 | PCIe ×2, USB 2.0, I2C and DP ×4 |
| B | 12–19 | PCIe ×2, SATA, USB 2.0 and 3.0, audio, UIM, HSIC, SSIC, I2C and SMBus |
| C | 16–23 | Reserved for future use |
| D | 20–27 | |
| E | 24–31 | PCIe ×2, USB 2.0, I2C, SDIO, UART and PCM |
| F | 28–35 | Future Memory Interface (FMI) |
| G | 39–46 | Reserved for custom use (unused in the M.2 specification) |
| H | 43–50 | Reserved for future use |
| J | 47–54 | |
| K | 51–58 | |
| L | 55–62 | |
| M | 59–66 | PCIe ×4, SATA and SMBUS |
| Type ID | Top side | Bottom side |
|---|---|---|
| S1 | 1.20 mm | 0.00 mm |
| S2 | 1.35 mm | 0.00 mm |
| S3 | 1.50 mm | 0.00 mm |
| D1 | 1.20 mm | 1.35 mm |
| D2 | 1.35 mm | 1.35 mm |
| D3 | 1.50 mm | 1.35 mm |
| D4 | 1.50 mm | 0.70 mm |
| D5 | 1.50 mm | 1.50 mm |
M&b Serial Key Generator
The PCB of an M.2 module provides a 75-position edge connector; depending on the type of module, certain pin positions are removed to present one or more keying notches. Host-side M.2 connectors (sockets) may populate one or more mating key positions, determining the type of modules accepted by the host; as of April 2014, host-side connectors are available with only one mating key position populated (either B or M).[4][11][16] Furthermore, M.2 sockets keyed for SATA or two PCI Express lanes (PCIe ×2) are referred to as 'socket 2 configuration' or 'socket 2', while the sockets keyed for four PCI Express lanes (PCIe ×4) are referred to as 'socket 3 configuration' or 'socket 3'.[1]:15[17]
For example, M.2 modules with two notches in B and M positions use up to two PCI Express lanes and provide broader compatibility at the same time, while the M.2 modules with only one notch in the M position use up to four PCI Express lanes; both examples may also provide SATA storage devices. Similar keying applies to M.2 modules that utilize provided USB 3.0 connectivity.[4][16][18]
Various types of M.2 devices are denoted using the 'WWLL-HH-K-K' or 'WWLL-HH-K' naming schemes, in which 'WW' and 'LL' specify the module width and length in millimeters, respectively. The 'HH' part specifies, in an encoded form, whether a module is single- or double-sided, and the maximum allowed thickness of mounted components; possible values are listed in the right table above. Module keying is specified by the 'K-K' part, in an encoded form using the key IDs from the left table above; it can also be specified as 'K' only, if a module has only one keying notch.[4][11]
Beside socketed modules, the M.2 standard also includes the option for having permanently soldered single-sided modules.[11]
NGSFF (NF1)[edit]
Next Generation Small Form Factor (NGSFF), officially named NF1, is a larger SSD form factor developed by Samsung.[19] NF1 is evolved from M.2, and uses the same M-keyed connector as M.2, but it is nevertheless not directly compatible with M.2. Key differences between NF1 and M.2 are: NF1 is a larger card with dimensions 110mm length and 30.5mm width, uses 12V power, and supports enterprise features such as dual-port access, slot power-down and hot-swap. For server use, NF1 cards are typically installed in a tray carrier.
Taken together, these differences make NF1 more suitable for enterprise deployment than M.2, at higher density than 2.5' SSD (U.2) drives. As of late 2018, NF1 modules of up to 16TiB of NAND SSD storage have come to market. An NF1-based 1U server can hold up to 36 such NF1 modules (576TiB) in a single 1U rack height.
M.2 Compatibility
- NF1 cards cannot be used in an M.2 SSD slot. The NF1 card is wider (30.5mm) and requires +12V power.
- NF1 does not support SATA as an option. It is NVM Express (NVMe) interface only.
- M.2 / NVMe devices can however be used in an NF1 platform with an appropriate adapter.
Other NVMe SSD Compatibility
- NF1 can be adapted to PCI Express Add-In-Card, or to U.2 SSD form factors.
PCI-SIG Statement Regarding NF1 Interoperability with M.2
PCI-SIG has issued a warning on NF1's use of the M.2 connector. While NF1 allocates signal pins that are not defined or are reserved in M.2, there are two issues: potential for electrical damage to an M.2 inserted into an NF1 slot, and use of reserved pins that PCI-SIG had earmarked for other purposes.[20]
See also[edit]
References[edit]
- ^ abcdefghiJim Handy; Jon Tanguy; Jaren May; David Akerson; Eden Kim; Tom Coughlin (September 20, 2014). 'SNIA Webcast: All About M.2 SSDs'(PDF). SNIA. Retrieved July 15, 2015.
- ^ abc'SATA M.2 Card'. SATA-IO. Retrieved September 14, 2013.
- ^ abcMark Kyrnin. 'What Is M.2? New Interface and Form Factor For Compact SSD Drives in Laptops and Desktops'. compreviews.about.com. Retrieved July 15, 2015.
- ^ abcdefgh'M.2 Connector (NGFF) Introduction'(PDF). orvem.eu. ATTEND. Archived from the original(PDF) on February 3, 2014. Retrieved January 17, 2014.
- ^ abcDave Landsman (August 9, 2013). 'AHCI and NVMe as Interfaces for SATA Express Devices – Overview'(PDF). SATA-IO. Retrieved July 15, 2015.
- ^'SATA-IO FAQ: What is the M.2 card and what is the status of the specification?'(PDF). SATA-IO. August 8, 2013. p. 2. Retrieved July 15, 2015.
- ^'Serial ATA Revision 3.2 (Gold Revision)'(PDF). knowledgetek.com. SATA-IO. August 7, 2013. pp. 194–209. Archived from the original(PDF) on March 27, 2014. Retrieved July 15, 2015.
- ^ abPaul Wassenberg (June 19, 2013). 'SATA Express: PCIe Client Storage'(PDF). SATA-IO. Retrieved October 2, 2013.
- ^'PCI Express M.2 Specification Revision 1.0'. PCI-SIG. 2013. Retrieved December 14, 2013.
- ^'M.2 Frequently Asked Questions'. Kingston Technology. Retrieved July 15, 2015.
- ^ abcdefgh'M.2 (NGFF) Quick Reference Guide'(PDF). Tyco Electronics. Retrieved November 16, 2013.
- ^'Intel SSD 530 Series Arriving Next Week – Feature NGFF M.2 Interface'. wccftech.com. Retrieved September 14, 2013.
- ^'M2P4S M.2 (NGFF) PCIe base SSD to PCIe ×4 Adapter'. hwtools.net. February 14, 2014. Retrieved June 22, 2014.
- ^John Burek (April 14, 2015). '2015 Guide: The Best M.2 Solid-State Drives'. computershopper.com. Retrieved July 15, 2015.
- ^'SMBus interface for SSD Socket 2 and Socket 3 (PCI-SIG engineering change notice)'(PDF). PCI-SIG. August 11, 2014. p. 2. Retrieved August 5, 2015.
- ^ abcMarshall R. (April 7, 2014). 'Buying an M.2 SSD? How to tell which is which?'. Asus. Retrieved April 28, 2014.
- ^Jack Zhang; Mark Liang (July 4, 2015). 'NVM Express Based Solid-State Drives: Crossing the Chasm, Going Mainstream'(PDF). Intel. p. 39. Retrieved August 27, 2015.
- ^Les Tokar (November 24, 2013). 'Understanding M.2 NGFF SSD standardization (or the lack of)'. thessdreview.com. Retrieved April 28, 2014.
- ^Mission Peak (NF1) Whitepaper (Samsung Global, September 2018)
- ^M.2 Interoperability Warning (PCI-SIG, November 2018)
External links[edit]
M&b Serial Key
| Wikimedia Commons has media related to M.2. |
- Official Serial ATA International Organization (SATA-IO) website
- Official Peripheral Component Interconnect Special Interest Group (PCI-SIG) website
- Understanding M.2, the interface that will speed up your next SSD, Ars Technica, February 9, 2015, by Andrew Cunningham
- Samsung XP941 M.2 PCIe SSD Review (512 GB), September 22, 2013, by Les Tokar
- Benchmarking Samsung NVMe SSD 960 EVO M.2, March 27, 2017, by Taras Shved
- LFCS: Preparing Linux for nonvolatile memory devices, LWN.net, April 19, 2013, by Jonathan Corbet
- PCIe SSD 101: An Overview of Standards, Markets and Performance, SNIA, August 2013, archived from the original on February 2, 2014
- LSI SandForce SF3700 Flash Controllers on YouTube, November 18, 2013
- Interface card mount – US patent 20130294023, November 7, 2013, assigned to Raphael Gay